SPRUDELUX® CO2 transfer adapter for water carbonator Duo Quick Connect QC, Art and Terra. Adapter for transferring the CO2 gas from large bottles 2, 6 or 10 kg into the new Quick Connect CO2 cylinders
Description
With the adapter, it is a breeze to fill the new quick cylinders yourself and this is how it works:
✅ 1. Use a screwdriver to empty the residual pressure of the CO2 cylinder by pressing the pin of the valve. ✔ 2. Place the cylinder in the freezer for a few hours so that the CO2 cylinder is ice cold. ✔ 3. Screw the union nut of the transfer adapter to the large CO2 bottle with an open-end wrench
✅ 4. Insert an empty Quick Connect CO2 cylinder into the adapter. ✔ 5. Open the valve of the large gas cylinder, the gas flows into the cylinder. 6. After about 15-20 seconds, the cylinder has been filled up. 7. Turn the valve of the large gas bottle again. 8. Lower the residual pressure on the vent screw. 9. And you're done! Now the full quick cylinder can be stretched out of the adapter and used in the carbonator
Box contents: transfer adapter suitable for soda water carbonator Quick Connect ✔ instruction manual in German
Important note: : Suitable only for new Quick Connect system.
