Search results
Kaish Music-
KAISH 9V Battery Cover Battery Box Case Compartment for Active Guitar Bass
Share Amazon Prices Description- Material: ABS; Very good quality guitar bass 9V battery case
- Surface Size: 78mm (Length) x 41mm (Width) x 22mm (Height)
- Mounting Case Size: 56mm (Length) x 30mm (Width)
- Please be sure to verify the dimensions to confirm the case would fit your guitar before you order it
- Just a Case; Battery or Screws are not included
-
KAISH Heavy Duty 3 Way Guitar Pickup Lever Switch Pickup Selector Switch for Strat Tele with 3 Plastic Tips
Share Amazon Prices Description- Approximately 40mm distance between mounting holes (Nickel mounting screws #6-32 x 3/8"); designed to upgrade the cheap and replace nasty stock switches that come with most guitars and basses
- Nice durable sturdy switch with metal body - one piece shell to minimise "flexing" damage from any knocking on the switch tip
- Solid construction with shielding and solid feeling switching, smooth detents and quiet, no extraneous noise when switching
- Body is enclosed and screwed shut, to avoid things from effecting contact points, with ground tags on both sides
- Enclosed ball bearing operation. The thick, cast metal case provides a superior base and housing for the toggle and circuit board, also provides a more solid feel to the overall switch when it is mounted to the guitar
-
KAISH Heavy Duty 5 Way Guitar Pickup Lever Switch Guitar Pickup Selector Switch for Strat Tele with Plastic Chrome Tip
Share Amazon Prices Description- Approximately 40mm distance between mounting holes (Nickel mounting screws #6-32 x 3/8"); designed to upgrade the cheap and replace nasty stock switches that come with most guitars and basses
- Nice durable sturdy switch with metal body - one piece shell to minimise "flexing" damage from any knocking on the switch tip
- Solid construction with shielding and solid feeling switching, smooth detents and quiet, no extraneous noise when switching
- Body is enclosed and screwed shut, to avoid things from effecting contact points, with ground tags on both sides
- Enclosed ball bearing operation. The thick, cast metal case provides a superior base and housing for the toggle and circuit board, also provides a more solid feel to the overall switch when it is mounted to the guitar
-
KAISH Pack of 20 Bass Guitar Pickup Mounting Screws Pickup Springs for Precision P Bass or J Bass or P90 Soap Bar Pickups Nickel
Share Amazon Prices Description- Pickup mounting screws and springs for most bass guitar pickups or P90 pickups
- Screws Dimension: 36mm(total length including head) x 2.6mm(thread diameter) x 4.2mm(head diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)
- Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the bass pickups or P90 Pickups
- These screws are with short 4.2mm diameter head which can compatible with most bass pickups
- Please note these are just after market pickup screws and springs, so they may not be exact same with your original screws and springs,especially for the springs! We only produce quality guitar parts and accessoroies, we don't make inferior parts or accessoroies
-
KAISH Pack of 20 American Thread Humbucker Pickup Height Screws Guitar Humbucker Pickup Screws with Springs for Gibson/EMG/Seymour Duncan/Dimarzio Nickel
Share Amazon Prices Description- Pickup Height screws are Imperial/USA thread which can fit most (not all) Gibson/EMG/Seymour Duncan or Dimarzio Pickups
- Pickup Height Screws Dimension: 32mm(total length including head) x 2.4mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)
- Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Gibson/EMG/Seymour Duncan or Dimarzio Pickups
- Important Note: Please be sure to confirm the thread type of your pickups before you order the item, you may not be able to find the correct screws if you don't know the thread type of your pickups
- These are just after market pickup screws, so the screws and springs may not be exact same with your original screws and springs; We only produce quality guitar parts and accessoroies, we don't make inferior parts or accessoroies
-
KAISH - Taco de lijado y nivelación de trastes para guitarra y bajo. Herramienta de lutier
Share Amazon Prices Description- 40,6 cm, fabricado con madera de haya.
- La longitud del taco es de 200 mm (aprox.), el ancho de 70 mm (aprox.), y la altura de 34 mm (aprox.).
- Taco de lijado para lutier muy práctico.
- Ten en cuenta que el papel de lija no está incluido. Tienes que pegar un papel de lija al taco para lijar.
-
KAISH Puente cromado para guitarra Tune-O-Matic con sillines de rodillo para guitarra Epi Les Paul, SG, Dot, Bigsby con postes roscados M8
Share Amazon Prices Description- Diseñado con precisión, con chapado de calidad. Los sillines de rodillo son perfectos para usar con un Bigsby, o simplemente para reducir las roturas de cuerdas y añadir soporte a cualquier guitarra estilo LP. Este modelo tiene agujeros de poste de 6,3 mm para dejar caer más de 6 mm, normalmente se encuentran en la mayoría de guitarras Epiphone y muchas otras marcas de guitarras similares.
- Incluye anclajes y postes de puente roscados M8 grandes con sección superior de 6 mm de diámetro
- Anillos de retención de sillín de alta estabilidad para eliminar el traqueteo del sillín
- Distancia entre cuerdas de 52 mm E a e; 73,5 mm de distancia entre postes de centro a centro, el puente tiene un radio de 14 pulgadas.
- Puente estilo Tune-O-Matic con sillines de rodillo para una mayor estabilidad de afinación, mayor sostenimiento y menos roturas de cuerdas. 6 sillines con ajuste de entonación independiente
-
KAISH Pack of 20 Bass Guitar Pickup Mounting Screws Pickup Springs for Precision P Bass or J Bass or P90 Soap Bar Pickups Black
Share Amazon Prices Description- Pickup mounting screws and springs for most bass guitar pickups or P90 pickups
- Screws Dimension: 36mm(total length including head) x 2.6mm(thread diameter) x 4.2mm(head diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)
- Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the bass pickups or P90 Pickups
- These screws are with short 4.2mm diameter head which can compatible with most bass pickups
- Please note these are just after market pickup screws and springs, so they may not be exact same with your original screws and springs,especially for the springs! We only produce quality guitar parts and accessoroies, we don't make inferior parts or accessoroies
-
KAISH Metal Nickel 10mm Vintage Guitar Tuning Keys Conversion Bushings Adapter Ferrules
Share Amazon Prices Description- Zinc cost-effective converison bushings with 6.2mm(0.24") I.D. and 10.2mm O.D. for installing vintage tuners on modern heardstock with 3/8"(10mm) tuner holes
- Dimensions: Inner hole diameter: 6.2mm; Outside Diameter: 10.2mm; Total Height: 7.6mm; Top Diameter: 14mm
- These bushings are used for Wilkinson vintage style tuners/Gotoh SD Series vintage style locking tuners(not for Gotoh standard vintage tuners)/various import vintage style tuners with 6mm string posts; Do not fit USA vintage style tuners with 6.3mm string posts, please choose 6.5mm(0.25") I.D. bushings for USA vintage guitar keys
- Make sure to measure the diameter of your vintage tuner's string posts as well as existing holes in your guitar's headstock, and choose correct size accordingly
- Nice finished durable converison bushings, no burrs, well built and easy to install, press-fit "drop in" bushings
-
KAISH 43mm Unbleached Pure Bone Nut Guitar Slotted Bone Nut fits Strat Tele 43x3.5mm
Share Amazon Prices Description- Color: Unbleached (Flat Bottom, not Curved Bottom)
- Dimension: 43x3.5x4.5/5.16/5 (mm)
- String Spacing (E to E): 35mm
- Important note: you may need to sand or deepen the slots, and polish it when you install the nut.
-
Kit de vis de montage Kaish pour hauteur de Humbucker USA/Imperial Thread Noir
Share Amazon Prices Description- Les vis de hauteur du micro sont adaptés à la plupart des micros Epiphone (pas tous) ou la plupart des micros Humbucker fabriqués en Chine.
- 4 vis de hauteur micro - Dimensions : 28,4 mm (longueur totale avec la tête) x 2,9 mm (diamètre du filetage) x 5,2 mm (diamètre de la tête) - 8 vis pour cadre du micro - Dimensions : 17,6 mm (longueur totale avec la tête) x 2,5 mm (diamètre du filetage) - Ressorts micro - Dimensions : 26 mm (longueur) x 4,7 mm (diamètre extérieur) x 3,3 mm (diamètre intérieur).
- En raison de la grande variété de micros et de vis disponibles sur le marché, nous vous recommandons de vérifier attentivement les dimensions avant de commander l'article - Nous ne pouvons pas garantir la compatibilité de ces vis avec les micros Epiphone Les Paul ou Humbucker fabriqués en Chine.
- Remarque importante : Veuillez vérifier le type de filetage de vos micros avant de commander l'article afin de trouver les vis avec le filetage adapté.
- Vis de marché secondaire pour microphone - Les vis et les ressorts peuvent présenter des différences par rapport à vos vis et ressorts d'origine.
-
KAISH Pack of 2 Black Vintage Top Hat Switch Tip 3 Way or 4 Way Pickup Selector Switch Knobs for USA Tele/Telecaster
Share Amazon Prices Description- Fits most U.S. and Mexico made Telecaster models which use Oak Grigsby or other USA SWITCHES
- They DO NOT fit Import, Squier, or other Metric switches with smaller 9/64" Blades, they only fit Oak-Grigsby or other USA SWITCHES with 3/16" wider Blades
- No matter any models of switch on your guitar, please double-check that your switch blade is 3/16" wide (+/- 0.005'' error
- Direct replacements for Fender Telecaster guitars
- Package includes 2 switch tips, please note NO switches are included
-
KAISH Lot de 2 boutons de commutateur de micro 5 voies pour guitare USA Strat/Stratocaster Chromé
Share Amazon Prices Description- En plastique
- Les pointes ont un trou transversal d'une longueur d'environ 4,8 mm
- Les embouts s'adaptent aux interrupteurs en chêne ou CRL fabriqués aux États-Unis avec des lames de 4,8 mm, tels que les Fender Strats américains, pas les interrupteurs Squier Strat ou d'autres interrupteurs fabriqués dans les pays asiatiques avec des lames plus petites
- Veuillez vérifier les dimensions avant de commander l'article
- Contenu de l'emballage : 2 x embouts de commutateur (interrupteur non inclus)
-
Kaish incurvé 42 mm non blanchi Pure Sillet en os Guitare fendue OS Écrou pour Strat/Tele 42 x 3.2 mm
Share Amazon Prices Description- Couleur : écru (fond incurvé, pas fond plat)
- Dimensions : 42 x 3,2 x 5/5,6/4,6 mm
- Espacement des cordes (E à E) : 35,4 mm
- Remarque importante : vous devrez peut-être poncer ou approfondir les fentes et les polir lorsque vous installez l'écrou.
-
KAISH 10pcs Guitar AMP Amplifier Push on fit Knobs Black with Gold Aluminum Cap Top Fits 6mm diameter Pots Marshall Amplifiers
Share Amazon Prices Description- Material: knobs is made of ABS (plastic); cap is made of Aluminum
- Total Height: about 15.6mm; Outer diameter at the top: about 15.8mm; Outer diameter at the base: about 19.8mm
- Fits Marshall Amplifiers with 5.8mm to 6mm Shaft Pots, these knobs DO not fit 'D' shaft Pots
- Push on fit, no brass insert or set screw
- Due to the wide variety of amplifiers and parts in the market, please be sure to verify the diameter of the pots on your AMP before you change the knobs for your amplifier
-
Kaish 2 pcs Noir voies en chêne/CRL Style 5 Way Strat Interrupteur à bouton capuchon pour USA Fender Stratocaster
Share Amazon Prices Description- Fabriqué en plastique
- Les conseils ont une croix Longueur du trou qui est d'environ 4,8 mm
- Les conseils Fit USA fabriqué en chêne ou CRL commutateurs avec 4,8 mm lames, commutateurs non fabriqué dans les pays asiatiques avec de petites lames
- Veuillez vérifier la dimension avant de commander l'article
-
KAISH 20 Stück American Thread Humbucker Tonabnehmer Höhenschrauben Gitarre Humbucker Pickup Schrauben mit Federn für Gibson/EMG/Seymour Duncan/Dimarzio Schwarz
Share Amazon Prices Description- Tonabnehmer-Höhenschrauben sind imperial/USA-Gewinde, die für die meisten (nicht alle) Gibson/EMG/Seymour Duncan oder Dimarzio Tonabnehmer geeignet sind
- Maße der Tonabnehmerhöhe: 32 mm (Gesamtlänge inkl. Kopf) x 2,4 mm (Gewindedurchmesser); Maße der Tonabnehmerfedern: 26 mm (Länge) x 4,7 mm (Außendurchmesser) x 3,3 mm (Innendurchmesser)
- Aufgrund der Vielzahl von Tonabnehmern und Schrauben auf dem Markt überprüfen Sie bitte die Maße sorgfältig, bevor Sie den Artikel bestellen. Wir können nicht versprechen, dass diese Schrauben für alle Gibson/EMG/Seymour Duncan oder Dimarzio Tonabnehmer geeignet sind
- Wichtiger Hinweis: Bitte stellen Sie sicher, dass Sie den Gewindetyp Ihrer Tonabnehmer bestätigen, bevor Sie den Artikel bestellen. Möglicherweise können Sie nicht die richtigen Schrauben finden, wenn Sie den Gewindetyp Ihrer Tonabnehmer nicht kennen
- Es handelt sich um Tonabnehmerschrauben, daher sind die Schrauben und Federn möglicherweise nicht exakt mit Ihren Original-Schrauben und Federn übereinstimmen. Wir produzieren nur hochwertige Gitarrenteile und Zubehör, wir stellen keine minderwertigen Teile oder Zubehör her
-
KAISH 42mm Unbleached Pure Bone Nut Guitar Slotted Bone Nut for Strat Tele 42x3.5mm
Share Amazon Prices Description- Color: Unbleached (Flat Bottom, not Curved Bottom)
- Dimension: 42x3.5x4.5/3.8 (mm)
- String Spacing (E to E): 34.5mm
- Important note: you may need to sand or deepen the slots, and polish it when you install the nut.
-
KAISH Nickel Metal Curved Bottom Jack Plate Curved Base Square Jackplate for Les Paul LP Guitars
Share Amazon Prices Description- Dimension: 34.7 x 34.7 (mm)
- Screws distance: 25 x 25 (mm)
- Central hole diameter: 10mm
-
KAISH 2 Ply White/Black CUSTOM Printing Truss Rod Cover For Epiphone Style Les Paul LP
Share Amazon Prices Description- 3 Hole 2 Ply; For Epiphone Style Les Paul Guitars; The screws are not included
- Screw holes distance from Center to Center: about 18(mm)x51(mm)
- Please check the dimension before you order the item
-
KAISH ST/Strat Style Standard Gitarre Rückplatte ST Tremolo Trem Cover für USA Stratocaster Weiß 3-lagig
Share Amazon Prices Description- The trem cover fits USA/Mexican Standard Fender Strats,but not Fender Squier Strats or other types of Strats.If you have other types of strats,you may need to make a little modification to let it fit
- Pickguard is made of PVC Plastic and top layer is printed pattern by 3D technology
- Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)
- Due to the wide variety of Strats in the market,please be sure to verify the dimensions carefully before you order the item
- Free pickguard mounting screws are included
-
KAISH Schlagbrett im ST/Stratocaster-Stil, 11 Löcher, SSS Pickguard mit ST-Rückplatte, Tremolo-Abdeckung für USA/Mexiko-Stratocaster/Stratocaster, schwarz gelb
Share Amazon Prices Description- Farbe: Schwarz Gelb Wicker 3-lagig
- Material: Kunststoff (Schlagbrett ist mit Original-Schutzfolie bedeckt)
- Bitte beachten Sie, dass der Artikel nur für amerikanische/mexikanische moderne Standard Fender Strats passt. Nicht geeignet für Squier Strats oder andere Arten von Strats.
-
KAISH Chrome Vintage ST Strat Guitar Trem Tremolo Bridge Full Size Block Bent Saddles
Share Amazon Prices Description- Full Size zinic alloy Block; Bent Saddles
- Push on fit tremolo arm
- String Spacing: 10.8mm
- Please check the photo dimension carefully to confirm the bridge will fit your guitar
-
KAISH American Vintage 5 Hole Tele Pickguard TL Guitar Pick Guard Scratch Plate for Tele/Telecaster Aged White 3 Ply
Share Amazon Prices Description- Color: Aged White 3 Ply
- Material: Plastic (Pickguard is covered by original protective film)
- The item only fits American/Mexican Vintage Fender Teles, not Squier or any other Teles
- Please note there are no pickup mounting screws around neck pickup
-
KAISH Manico in PVC in vinile con amplificatore per chitarra in stile vintage nero con accessori per amplificatori FD
Share Amazon Prices Description- Lunghezza manico: 218 mm; larghezza manico: 30 mm
- Dimensioni viti metriche M5: lunghezza 25 mm; diametro testa 6,93 mm; diametro filettatura 3,92 mm; dimensioni dado M5: diametro esterno 5,5 mm; altezza 8,05 mm
- Le viti e i dadi della maniglia si adattano perfettamente alle maniglie dell'amplificatore, adatte per sostituire le maniglie vecchie e rotte dell'amplificatore, facili da installare
- Facile da trasportare e riporre, facile da usare, buone prestazioni
- Il pacchetto include: 1x Maniglia Amplificatore, 4x Kit Viti di montaggio, 4x Piastra metallica fissa
-
KAISH - Foglio per battipenna, autoadesivo, per chitarre acustiche, 25 x 20 cm, colore: tartarugato rosso
Share Amazon Prices Description- Materiale: plastica PVC.
- Dimensioni: circa 25 cm (lunghezza) x 20 cm (larghezza) x 0,7 mm (spessore).
- Il foglio ha una pellicola protettiva in plastica nella parte superiore e autoadesiva sul retro.
- Utilizzare il foglio di materiale per tagliare dei battipenna per la tua chitarra acustica.
- Contenuto della confezione: 1 foglio per battipenna.
-
KAISH 13 Hole P Bass Style Pickguard PB Scratch Plate Bass Pickguard for USA/Mexico Precision P Bass Black 3 Ply
Share Amazon Prices Description- Color: Black 3 Ply
- Material: Plastic (Pickguard is covered by original protective film)
- The pickguard only fits American/Mexican Fender P Bass,it doesn¡¯t fit Squier P Bass or other types of P Basses
-
KAISH Black 3 Ply Tele Humbucker Guitar Pickguard Scratch Plate for Fender Telecaster
Share Amazon Prices Description- Color: Black 3 Ply
- Material: Plastic (Pickguard is covered by original protective film)
- The pickguard only fits Mexican Standard Fender Teles,but not Squier or any other types of Teles
-
KAISH Chrome Brass Metric Electric Guitar Jackplate Electrosocket Jack Plate for FD Import Style Tele/Telecaster
Share Amazon Prices Description- KAISH brass electrosocket jackplate with brass Mono output Jack Socket; Well made with flawless finish; Great upgrade for traditional Tele jack socket
- Metric thread is compatible with most import Jacks and American 3/8"-32 UNEF-2A Thread is compatible with most USA made jacks (such as switchcraft jacks); Please make sure to choose the right threaded Electrosocket Jackplate for your output jack
- For Standard 7/8"(22mm) Diameter Hole; Sturdy and Reliable; The jack makes quality connections for your guitar and hold the cables in well without loose connections
- The Electrosocket curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening; The jack is easy soldering with high tighter connection and great reassuring click when you plug in/out with solid connect
- Mounting screws includes, hold the assembly firmly and eliminates noise as well as intermittent connection issue
-
KAISH Silver Mirror Tele Guitar Pickguard Scratch Plate for Fender Telecaster
Share Amazon Prices Description- Color: Silver Mirror
- Material: Plastic (Pickguard is covered by original protective film)
- The 8 hole mounting screw holes only fit American/Mexican Fender Teles,but not Squier or any other types of Teles;
- Please note there are no mounting screw holes for neck pickup;
-
KAISH American Thread Humbucker Pickup Height Screws Humbucker Pickup Ring Pickup Surround Frame Mounting Screws Springs for Gibson/EMG/Seymour Duncan/Dimarzio Gold
Share Amazon Prices Description- Pickup Height screws are Imperial/USA thread which can fit most (not all) Gibson/EMG/Seymour Duncan or Dimarzio Pickups
- 4 Pickup Height Screws Dimension: 28.4mm(total length including head) x 2.9mm(thread diameter); 8 Pickup Frame Screws Dimension: 17.6mm(total length including head) x 2.5mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)
- Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Epiphone Les Paul Pickups or Humbucker Pickups made in China
- Important Note: Please be sure to confirm the thread type of your pickups before you order the item, you may not be able to find the correct screws if you don't know the thread type of your pickups
- These are just after market pickup screws, so the screws and springs may not be exact same with your original screws and springs; We only produce quality guitar parts and accessoroies, we don't make inferior parts or accessoroies
-
KAISH Heavy Duty 5 Way Guitar Pickup Lever Switch Guitar Pickup Selector Switch for Strat Tele with Plastic Gold Tip
Share Amazon Prices Description- Approximately 40mm distance between mounting holes (Gold mounting screws #6-32 x 3/16"); designed to upgrade the cheap and replace nasty stock switches that come with most guitars and basses
- Nice durable sturdy switch with metal body - one piece shell to minimise "flexing" damage from any knocking on the switch tip
- Solid construction with shielding and solid feeling switching, smooth detents and quiet, no extraneous noise when switching
- Body is enclosed and screwed shut, to avoid things from effecting contact points, with ground tags on both sides
- Enclosed ball bearing operation. The thick, cast metal case provides a superior base and housing for the toggle and circuit board, also provides a more solid feel to the overall switch when it is mounted to the guitar
